Follow along with the video below to see how to install our site as a web app on your home screen.
Notă: This feature may not be available in some browsers.
Oct 31 03:06:04 s1 kernel: Firewall: *TCP_IN Blocked* IN=eth0 OUT= MAC=00:07:cb$
Oct 31 03:10:01 s1 systemd: Created slice user-0.slice.
Oct 31 03:10:01 s1 systemd: Starting user-0.slice.
Oct 31 03:10:01 s1 systemd: Started Session 10358 of user root.
Oct 31 03:10:01 s1 systemd: Starting Session 10358 of user root.
Oct 31 03:10:01 s1 systemd: Started Session 10359 of user root.
Oct 31 03:10:01 s1 systemd: Starting Session 10359 of user root.
Oct 31 03:10:02 s1 systemd: Removed slice user-0.slice.
Oct 31 03:10:02 s1 systemd: Stopping user-0.slice.
Cod:Oct 31 03:10:01 s1 systemd: Created slice user-0.slice. Oct 31 03:10:01 s1 systemd: Starting user-0.slice. Oct 31 03:10:01 s1 systemd: Started Session 10358 of user root. Oct 31 03:10:01 s1 systemd: Starting Session 10358 of user root. Oct 31 03:10:01 s1 systemd: Started Session 10359 of user root. Oct 31 03:10:01 s1 systemd: Starting Session 10359 of user root. Oct 31 03:10:02 s1 systemd: Removed slice user-0.slice. Oct 31 03:10:02 s1 systemd: Stopping user-0.slice.
Asta nu e grav ci absolut normal. Daca ai un cron-job pe server, atunci apare.systemd: Starting Session 10359 of user root
Asta nu e udp.TCP_IN Blocked
Nov 4 09:59:32 s1 kernel: Firewall: *UDP_IN Blocked* IN=eth0 OUT= MAC=ff:ff:ff$
Nov 4 09:59:34 s1 kernel: Firewall: *UDP_IN Blocked* IN=eth0 OUT= MAC=ff:ff:ff$
Nov 4 09:59:36 s1 kernel: Firewall: *UDP_IN Blocked* IN=eth0 OUT= MAC=ff:ff:ff$
Nov 4 09:59:39 s1 kernel: Firewall: *UDP_IN Blocked* IN=eth0 OUT= MAC=ff:ff:ff$
Nov 4 09:59:40 s1 kernel: Firewall: *UDP_IN Blocked* IN=eth0 OUT= MAC=ff:ff:ff$
Nov 4 09:59:42 s1 kernel: Firewall: *UDP_IN Blocked* IN=eth0 OUT= MAC=ff:ff:ff$
Nov 4 09:59:44 s1 kernel: Firewall: *UDP_IN Blocked* IN=eth0 OUT= MAC=ff:ff:ff$
Nov 4 09:59:46 s1 kernel: Firewall: *UDP_IN Blocked* IN=eth0 OUT= MAC=ff:ff:ff$
Nov 4 09:59:49 s1 kernel: Firewall: *UDP_IN Blocked* IN=eth0 OUT= MAC=00:07:cb$
. Inca nu am gasit solutie...kernel: Firewall: *UDP_IN Blocked* IN=eth0 OUT= MAC=ff:ff:ff$
Deschide un tichet de support la firma de unde ai serverul, poate e o problema de hardware.Astazi se fac 2 saptamani de cand n-a mai coborat sub 70%. Inca mai astept idei...
M-am uitat in /var/log/messages si am erorile alea de la firewall, nu asta o fi motivul? M-am uitat dupa fisiere suspecte, nu mi-a sarit nimic in ochi. Nu am video.Ai facut verificarile sugerate mai sus?
Pai doar asta ti-am suugerat mai sus?M-am uitat in /var/log/messages
smartctl 6.2 2013-07-26 r3841 [x86_64-linux-3.10.0-327.36.1.el7.x86_64] (local b uild)
Copyright (C) 2002-13, Bruce Allen, Christian Franke, www.smartmontools.org
=== START OF INFORMATION SECTION ===
Device Model: SAMSUNG MZ7LN256HMJP-00000
Serial Number: S2MJNX0H406443
LU WWN Device Id: 5 002538 d40cdc476
Firmware Version: MAV0100Q
User Capacity: 256,060,514,304 bytes [256 GB]
Sector Size: 512 bytes logical/physical
Rotation Rate: Solid State Device
Device is: Not in smartctl database [for details use: -P showall]
ATA Version is: ACS-2, ATA8-ACS T13/1699-D revision 4c
SATA Version is: SATA 3.1, 6.0 Gb/s (current: 3.0 Gb/s)
Local Time is: Fri Nov 18 10:53:33 2016 CET
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status: (0x00) Offline data collection activity
was never started.
Auto Offline Data Collection: Disabled.
Self-test execution status: ( 0) The previous self-test routine completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: ( 0) seconds.
Offline data collection
capabilities: (0x53) SMART execute Offline immediate.
Auto Offline data collection on/off supp ort.
Suspend Offline collection upon new
command.
No Offline surface scan supported.
Self-test supported.
No Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 2) minutes.
Extended self-test routine
recommended polling time: ( 133) minutes.
SCT capabilities: (0x003d) SCT Status supported.
SCT Error Recovery Control supported.
SCT Feature Control supported.
SCT Data Table supported.
SMART Attributes Data Structure revision number: 1
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_ FAILED RAW_VALUE
5 Reallocated_Sector_Ct 0x0033 100 100 010 Pre-fail Always - 0
9 Power_On_Hours 0x0032 099 099 000 Old_age Always - 3692
12 Power_Cycle_Count 0x0032 099 099 000 Old_age Always - 3
170 Unknown_Attribute 0x0032 100 100 010 Old_age Always - 0
171 Unknown_Attribute 0x0032 100 100 010 Old_age Always - 0
172 Unknown_Attribute 0x0032 100 100 010 Old_age Always - 0
173 Unknown_Attribute 0x0033 055 055 005 Pre-fail Always - 562
174 Unknown_Attribute 0x0032 100 100 000 Old_age Always - 0
178 Used_Rsvd_Blk_Cnt_Chip 0x0013 100 100 010 Pre-fail Always - 0
180 Unused_Rsvd_Blk_Cnt_Tot 0x0013 100 100 010 Pre-fail Always - 804
184 End-to-End_Error 0x0033 100 100 097 Pre-fail Always - 0
187 Reported_Uncorrect 0x0032 100 100 000 Old_age Always - 0
194 Temperature_Celsius 0x0032 068 067 000 Old_age Always - 32
199 UDMA_CRC_Error_Count 0x003e 100 100 000 Old_age Always - 0
233 Media_Wearout_Indicator 0x0013 053 053 000 Pre-fail Always - 8919885
241 Total_LBAs_Written 0x0032 099 099 000 Old_age Always - 21635
242 Total_LBAs_Read 0x0032 099 099 000 Old_age Always - 244
249 Unknown_Attribute 0x0032 099 099 000 Old_age Always - 144000
SMART Error Log Version: 1
No Errors Logged
SMART Self-test log structure revision number 1
Num Test_Description Status Remaining LifeTime(hours) LBA _of_first_error
# 1 Short offline Completed without error 00% 2592 -
# 2 Short offline Completed without error 00% 261 -
SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
255 0 65535 Read_scanning was never started
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.
fsck from util-linux 2.23.2
e2fsck 1.42.9 (28-Dec-2013)
/dev/sda1 is mounted.
e2fsck: Cannot continue, aborting.
[root@s1 ~]# df -h
Filesystem Size Used Avail Use% Mounted on
/dev/sda2 216G 37G 168G 19% /
devtmpfs 7.8G 0 7.8G 0% /dev
tmpfs 7.8G 0 7.8G 0% /dev/shm
tmpfs 7.8G 785M 7.0G 10% /run
tmpfs 7.8G 0 7.8G 0% /sys/fs/cgroup
/dev/sda1 4.7G 117M 4.4G 3% /boot
tmpfs 1.6G 0 1.6G 0% /run/user/990
tmpfs 1.6G 0 1.6G 0% /run/user/0